Contents

1 12-mer dissociation rates

McGeary, Lin et al. (2019) used RNA bind-n-seq (RBNS) to empirically determine the affinities (i.e. dissoiation rates) of selected miRNAs towards random 12-nucleotide sequences (termed 12-mers). As expected, bound sequences typically exhibited complementarity to the miRNA seed region (positions 2-8 from the miRNA’s 5’ end), but the study also revealed non-canonical bindings and the importance of flanking di-nucleotides. Based on these data, the authors developed a model which predicted 12-mer dissociation rates (KD) based on the miRNA sequence. ScanMiR encodes a compressed version of these prediction in the form of a KdModel object.

The 12-mer is defined as the 8 nucleotides opposite the miRNA’s extended seed region plus flanking dinucleotides on either side:

2 KdModels

The KdModel class contains the information concerning the sequence (12-mer) affinity of a given miRNA, and is meant to compress and make easily manipulable the dissociation constants (Kd) predictions from McGeary, Lin et al. (2019).

We can take a look at the example KdModel:

library(scanMiR)
data(SampleKdModel)
SampleKdModel
## A `KdModel` for hsa-miR-155-5p (Conserved across mammals)
##   Sequence: UUAAUGCUAAUCGUGAUAGGGGUU
##   Canonical target seed: AGCATTA(A)

In addition to the information necessary to predict the binding affinity to any given 12-mer sequence, the model contains, minimally, the name and sequence of the miRNA. Since the KdModel class extends the list class, any further information can be stored:

SampleKdModel$myVariable <- "test"

An overview of the binding affinities can be obtained with the following plot:

plotKdModel(SampleKdModel, what="seeds")

The plot gives the -log(Kd) values of the top 7-mers (including both canonical and non-canonical sites), with or without the final “A” vis-à-vis the first miRNA nucleotide.

To predict the dissociation constant (and binding type, if any) of a given 12-mer sequence, you can use the assignKdType function:

assignKdType("ACGTACGTACGT", SampleKdModel)
##            type log_kd
## 1 non-canonical      0
# or using multiple sequences:
assignKdType(c("CTAGCATTAAGT","ACGTACGTACGT"), SampleKdModel)
##            type log_kd
## 1          8mer  -5129
## 2 non-canonical      0

The log_kd column contains log(Kd) values multiplied by 1000 and stored as an integer (which is more economical when dealing with millions of sites). In the example above, -5129 means -5.129, or a dissociation constant of 0.0059225. The smaller the values, the stronger the relative affinity.

2.1 KdModelLists

A KdModelList object is simply a collection of KdModel objects. We can build one in the following way:

# we create a copy of the KdModel, and give it a different name:
mod2 <- SampleKdModel
mod2$name <- "dummy-miRNA"
kml <- KdModelList(SampleKdModel, mod2)
kml
## An object of class "KdModelList"
## [[1]]
## A `KdModel` for hsa-miR-155-5p (Conserved across mammals)
##   Sequence: UUAAUGCUAAUCGUGAUAGGGGUU
##   Canonical target seed: AGCATTA(A)
## [[2]]
## A `KdModel` for dummy-miRNA (Conserved across mammals)
##   Sequence: UUAAUGCUAAUCGUGAUAGGGGUU
##   Canonical target seed: AGCATTA(A)
summary(kml)
## A `KdModelList` object containing binding affinity models from 2 miRNAs.
## 
##               Low-confidence             Poorly conserved 
##                            0                            0 
##     Conserved across mammals Conserved across vertebrates 
##                            2                            0

Beyond operations typically performed on a list (e.g. subsetting), some specific slots of the respective KdModels can be accessed, for example:

conservation(kml)
##           hsa-miR-155-5p              dummy-miRNA 
## Conserved across mammals Conserved across mammals 
## 4 Levels: Low-confidence Poorly conserved ... Conserved across vertebrates

3 Creating a KdModel object

KdModel objects are meant to be created from a table assigning a log_kd values to 12-mer target sequences, as produced by the CNN from McGeary, Lin et al. (2019). For the purpose of example, we create such a dummy table:

kd <- dummyKdData()
head(kd)
##         X12mer log_kd
## 1 AAAGCAAAAAAA -0.428
## 2 CAAGCACAAACA -0.404
## 3 GAAGCAGAAAGA -0.153
## 4 TAAGCATAAATA -1.375
## 5 ACAGCAACAAAC -0.448
## 6 CCAGCACCAACC -0.274

A KdModel object can then be created with:

mod3 <- getKdModel(kd=kd, mirseq="TTAATGCTAATCGTGATAGGGGTT", name = "my-miRNA")

Alternatively, the kd argument can also be the path to the output file of the CNN (and if mirseq and name are in the table, they can be omitted).

4 Common KdModel collections

The scanMiRData package contains KdModel collections corresponding to all human, mouse and rat mirbase miRNAs.

5 Under the hood

When calling getKdModel, the dissociation constants are stored as an lightweight overfitted linear model, with base KDs coefficients (stored as integers in object$mer8) for each 1024 partially-matching 8-mers (i.e. at least 4 consecutive matching nucleotides) to which are added 8-mer-specific coefficients (stored in object$fl) that are multiplied with a flanking score generated by the flanking di-nucleotides. The flanking score is calculated based on the di-nucleotide effects experimentally measured by McGeary, Lin et al. (2019). To save space, the actual 8-mer sequences are not stored but generated when needed in a deterministic fashion. The 8-mers can be obtained, in the right order, with the getSeed8mers function.



Session info

## R Under development (unstable) (2024-10-21 r87258)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 24.04.1 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.21-bioc/R/lib/libRblas.so 
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## time zone: America/New_York
## tzcode source: system (glibc)
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
## [1] scanMiR_1.13.0   BiocStyle_2.35.0
## 
## loaded via a namespace (and not attached):
##  [1] sass_0.4.9              utf8_1.2.4              generics_0.1.3         
##  [4] stringi_1.8.4           digest_0.6.37           magrittr_2.0.3         
##  [7] evaluate_1.0.1          grid_4.5.0              bookdown_0.41          
## [10] fastmap_1.2.0           jsonlite_1.8.9          GenomeInfoDb_1.43.0    
## [13] BiocManager_1.30.25     httr_1.4.7              fansi_1.0.6            
## [16] UCSC.utils_1.3.0        scales_1.3.0            Biostrings_2.75.0      
## [19] codetools_0.2-20        jquerylib_0.1.4         cli_3.6.3              
## [22] rlang_1.1.4             crayon_1.5.3            XVector_0.47.0         
## [25] cowplot_1.1.3           munsell_0.5.1           withr_3.0.2            
## [28] cachem_1.1.0            yaml_2.3.10             tools_4.5.0            
## [31] parallel_4.5.0          BiocParallel_1.41.0     seqLogo_1.73.0         
## [34] dplyr_1.1.4             colorspace_2.1-1        ggplot2_3.5.1          
## [37] GenomeInfoDbData_1.2.13 BiocGenerics_0.53.0     vctrs_0.6.5            
## [40] R6_2.5.1                stats4_4.5.0            lifecycle_1.0.4        
## [43] pwalign_1.3.0           zlibbioc_1.53.0         S4Vectors_0.45.0       
## [46] IRanges_2.41.0          pkgconfig_2.0.3         bslib_0.8.0            
## [49] pillar_1.9.0            gtable_0.3.6            data.table_1.16.2      
## [52] glue_1.8.0              xfun_0.48               tibble_3.2.1           
## [55] GenomicRanges_1.59.0    tidyselect_1.2.1        highr_0.11             
## [58] knitr_1.48              farver_2.1.2            htmltools_0.5.8.1      
## [61] labeling_0.4.3          rmarkdown_2.28          compiler_4.5.0