basilisk 1.19.0
Packages like reticulate facilitate the use of Python modules in our R-based data analyses, allowing us to leverage Python’s strengths in fields such as machine learning and image analysis. However, it is notoriously difficult to ensure that a consistent version of Python is available with a consistently versioned set of modules, especially when the system installation of Python is used. As a result, we cannot easily guarantee that some Python code executed via reticulate on one computer will yield the same results as the same code run on another computer. It is also possible that two R packages depend on incompatible versions of Python modules, such that it is impossible to use both packages at the same time. These versioning issues represent a major obstacle to reliable execution of Python code across a variety of systems via R/Bioconductor packages.
basilisk uses Conda (or more specifically, Miniforge) to provision a Python instance that is fully managed by the Bioconductor installation machinery.
This provides developers of downstream Bioconductor packages with more control over their Python environment, most typically by the creation of package-specific conda environments containing all of their required Python packages.
Additionally, basilisk provides utilities to manage different Python environments within a single R session, enabling multiple Bioconductor packages to use incompatible versions of Python packages in the course of a single analysis.
These features enable reproducible analysis, simplify debugging of code and improve interoperability between compliant packages.
The son.of.basilisk package (provided in the inst/example directory of this package) is provided as an example of how one might write a client package that depends on basilisk.
This is a fully operational example package that can be installed and run, so prospective developers should use it as a template for their own packages.
We will assume that readers are familiar with general R package development practices and will limit our discussion to the basilisk-specific elements.
StagedInstall: no should be set, to ensure that Python packages are installed with the correct hard-coded paths within the R package installation directory.
Imports: basilisk should be set along with appropriate directives in the NAMESPACE for all basilisk functions that are used.
.BBSoptions should contain UnsupportedPlatforms: win32, as builds on Windows 32-bit are not supported.
BasiliskEnvironment objectsTypically, we need to create some environments with the requisite packages using the conda package manager.
A basilisk.R file should be present in the R/ subdirectory containing commands to produce a BasiliskEnvironment object.
These objects define the Python environments to be constructed by basilisk on behalf of your client package.
library(basilisk)
my_env <- BasiliskEnvironment(envname="my_env_name",
pkgname="ClientPackage",
packages=c("pandas==1.4.3", "scikit-learn==1.1.1")
)
second_env <- BasiliskEnvironment(envname="second_env_name",
pkgname="ClientPackage",
packages=c("scipy=1.9.1", "numpy==1.22.1")
)As shown above, all listed Python packages should have valid version numbers that can be obtained by conda.
It is strongly recommended to explicitly list the versions of any dependencies so as to future-proof the installation process.
If the package versions are not known, we suggest using setBasiliskCheckVersions(FALSE) and listPackages() to identify the appropriate versions.
If a different version of Python is required, it should be explicitly listed in the packages=, e.g., with python=3.7.
Otherwise, basilisk will automatically use the conda-provided version of Python (here, 3.10.14) in all environments.
It is often a good idea to explicitly list a version of Python in packages=, even if it is already version-compatible with the default;
this ensures that the environment creation is robust to adminstrator overrides of the conda instance (see below).
By default, basilisk will fetch Conda packages from the conda-forge channel (see setupBasiliskEnv() for details).
This can be modified through the channels= argument in the BasiliskEnvironment() constructor, though some care is required with respect to licensing.
In particular, the default Anaconda channel (i.e.,defaults) is not free for commercial usage, which restricts the usability of any Bioconductor packages that use Conda packages from this channel.
It is also possible to install packages from PyPi via the pip= argument,
but this should be done with much caution.
An executable configure file should be created in the top level of the client package, containing the command shown below.
This enables creation of environments during basilisk installation if BASILISK_USE_SYSTEM_DIR is set.
#!/bin/sh
${R_HOME}/bin/Rscript -e "basilisk::configureBasiliskEnv()"For completeness, configure.win should also be created:
#!/bin/sh
${R_HOME}/bin${R_ARCH_BIN}/Rscript.exe -e "basilisk::configureBasiliskEnv()"Note that basilisk.R should be executable as a standalone file and create all BasiliskEnvironments as named variables in the current environment.
This is because the file will be directly sourced by configureBasiliskEnv() for system installation of the environments.
As such, the file should not assume that the rest of the client package has been installed or that the client’s various dependencies have been loaded.
Any R functions that use Python code should do so via basiliskRun(), which ensures that different Bioconductor packages play nice when their dependencies clash.
To use methods from the my_env environment that we previously defined, the functions in our hypothetical ClientPackage package should define functions like:
my_example_function <- function(ARG_VALUE_1, ARG_VALUE_2) {
proc <- basiliskStart(my_env)
on.exit(basiliskStop(proc))
some_useful_thing <- basiliskRun(proc, fun=function(arg1, arg2) {
mod <- reticulate::import("scikit-learn")
output <- mod$some_calculation(arg1, arg2)
# The return value MUST be a pure R object, i.e., no reticulate
# Python objects, no pointers to shared memory.
output
}, arg1=ARG_VALUE_1, arg2=ARG_VALUE_2)
some_useful_thing
}In the above chunk, a developer-defined function fun is passed to basiliskRun() for execution inside the proc context where the specified conda environment is loaded.
Developers should not make any assumptions about the nature of proc, which is dependent on the state of the R session.
For example, basilisk may choose to run fun in the current R session, or in another process with the same R installation, or even in another process with a different R installation.
basiliskStart() will lazily install conda and the Python packages in my_env if they are not already present.
This can result in some delays when any function using basilisk is first called;
afterwards, the installed environments will simply be re-used.
Developers should respect several constraints when defining a function for use in basiliskRun():
basiliskRun() may execute in a different process such that any pointers are no longer valid when they are transferred back to the parent process.
Both the arguments to the function passed to basiliskRun() and its return value MUST be amenable to serialization.:: operator.
This ensures that the relevant package will be loaded during function execution in a separate process.
Note that certain “problematic” Python packages may preclude the use of all non-base functions altogether, see comments on the “last-resort fallback” in ?basiliskStart.More details on acceptable function definitions are provided in ?basiliskRun.
Developers can check that their function behaves correctly in a different process
by setting setBasiliskShared(FALSE) and setBasiliskFork(FALSE) prior to running basiliskRun() in their unit tests.
Developers can persist variables across multiple calls to basiliskRun() by setting persist=TRUE.
This instructs basiliskRun() to pass along an environment to fun as the store= argument,
which can be used inside fun to set or get variables if basiliskRun() is called with the same proc.
Stored variables are not subject to the restrictions on the arguments/return value of fun, but they are strictly internal to any instance of proc.
my_example_function <- function() {
proc <- basiliskStart(my_env)
on.exit(basiliskStop(proc))
basiliskRun(proc, fun=function(store) {
store$something <- rand(1)
invisible(NULL)
}, persist=TRUE)
basiliskRun(proc, fun=function(store) {
store$something
}, persist=TRUE)
}This capability allows developers to modularize complex Python workflows by splitting up steps across multiple calls to basiliskRun().
However, it is probably unwise to re-use proc across user-visible functions, i.e., the end user should never have an opportunity to interact with proc.
In most cases, end users should not have to read this document. Properly configured basilisk clients should handle all aspects of Python environment creation and loading without requiring user intervention. That said, some system configurations are less cooperative than others: this section contains a list of known issues and possible fixes.
Historically, the Miniforge installers did not work if the installation directory contained spaces.
Recent Conda versions have improved support for spaces but mileage may vary in the packages.
If spaces are causing problems in the default installation path (check basilisk.utils::getExternalDir()),
consider setting the BASILISK_EXTERNAL_DIR environment variable to a location without spaces.
Windows has a limit of 260 characters for its file paths.
This is occasionally exceeded due to deeply nested directories for some packages, causing the conda installation to be incomplete or fail outright.
Furthermore, the Windows Miniforge installer has a limit of 46 characters for the top-level Conda installation directory.
If either of these constraints are causing problems, it may be possible to circumvent them by setting BASILISK_EXTERNAL_DIR to a shorter path.
Builds for 32-bit Windows are not supported due to a lack of demand relative to the difficulty of setting it up.
Older versions of Rstudio on MacOSX have some difficulties with the generation of separate processes (see here). As a workaround in such cases, users should set:
parallel:::setDefaultClusterOptions(setup_strategy = "sequential")Conda installations and environments tend to use a lot of disk space, so basilisk will automatically attempt to remove its old conda installations as well as unused environments for each client package. However, this removal may not be fast enough on systems with low disk usage quotas, resulting in incomplete or failed installations. In such cases, users can forcibly clear the external directory themselves to free up some space:
# Remove obsolete environments for specific package:
basilisk.utils::clearExternalDir(package = "pkg_name", obsolete.only = TRUE)
# Remove all environments for a specific package:
basilisk.utils::clearExternalDir(package = "pkg_name")
# Remove all basilisk-managed conda installations and environments:
basilisk.utils::clearExternalDir()IMPORTANT! the automatic installation brokered by basilisk assumes that the user accepts the Anaconda terms of service. This mostly boils down to “don’t hammer the Anaconda repository with requests”, see the commentary here.
Administrators of an R installation can modify the behavior of basilisk by setting a few environment variables. All environment variables described here must be set at both installation time and run time to have any effect. If any value is changed, it is generally safest to reinstall basilisk and all of its clients.
Setting the BASILISK_EXTERNAL_DIR environment variable will change where the conda instance and environments are placed by basiliskStart() during lazy installation.
This is usually unnecessary unless the default path contains spaces or the combination of the default location and conda’s directory structure exceeds the file path length limit on Windows.
Setting BASILISK_USE_SYSTEM_DIR to 1 will instruct basilisk to install the conda instance in the R system directory during R package installation.
Similarly, all (correctly configured) client packages will install their environments in the corresponding system directory when they themselves are being installed.
This is very useful for enterprise-level deployments as the conda instances and environments are (i) not duplicated in each user’s home directory, and (ii) always available to any user with access to the R installation.
However, it requires installation from source and thus is not set by default.
It is possible to direct basilisk to use an existing Conda installation,
by setting the BASILISK_EXTERNAL_CONDA environment variable to an absolute path to the conda installation directory.
This may be desirable to avoid redundant copies of the same conda installation.
Any replacement conda instance should be using a similar version of Python as basilisk’s default (3.10.14) to satisfy client packages that rely on the implict pinning.
Setting BASILISK_MINIFORGE_VERSION will change the Miniforge version installed by basilisk.
This should be set to the name of the tagged releases on the Miniforce installation page, .e.g, "24.3.0-0".
Setting BASILISK_NO_DESTROY to 1 will instruct basilisk to not destroy previous conda instances and environments upon installation of a new version of basilisk.
This destruction is done by default to avoid accumulating many large obsolete conda instances.
However, it is not desirable if there are multiple R instances running different versions of basilisk from the same Bioconductor release, as installation by one R instance would delete the installed content for the other.
(Multiple R instances running different Bioconductor releases are not affected.)
This option has no effect if BASILISK_USE_SYSTEM_DIR is set.
Setting BASILISK_NO_FALLBACK_R to 1 will instruct basilisk to not create an conda-based R installation as a last-resort fallback (see comments in ?basiliskStart).
This avoids the overhead of an internal R installation if it is known that shared library version conflicts will not occur.
It is most useful for streamlining applications where developers can (i) test that no conflicts occur in the installed subset of basilisk clients and/or (ii) control the versions of system libraries used by R.
This option only has an effect if BASILISK_USE_SYSTEM_DIR is set, as otherwise the fallback R installation is only created upon encountering version conflicts.
While basilisk is primarily intended for package developers, end users can also take advantage of its graceful handling of multiple Python environments in complex workflows.
For example, we can easily instantiate a conda environment in our working directory with createLocalBasiliskEnv():
if (.Platform$OS.type != "windows") {
tmp <- createLocalBasiliskEnv("basilisk-vignette-test",
packages=c("scikit-learn=1.1.1", "numpy=1.22.1"))
}We can then supply this environment’s path to basiliskRun() to execute Python-based calculations.
To demonstrate, we’ll apply scikit-learn’s truncated PCA on a random matrix.
Note that the restrictions mentioned above for fun are still applicable here.
if (.Platform$OS.type != "windows") {
x <- matrix(rnorm(1000), ncol=10)
basiliskRun(env=tmp, fun=function(mat) {
module <- reticulate::import("sklearn.decomposition")
runner <- module$TruncatedSVD()
output <- runner$fit(mat)
output$singular_values_
}, mat = x, testload="scipy.optimize")
}## [1] 12.66154 12.47409basiliskRun() can also be used with conda environments constructed outside of basilisk.
Of course, in this case, it is the user’s responsibility to ensure that the environment is correctly provisioned.
Some caution is also required as basilisk is not guaranteed to work with environments created by a different version of conda, though problems seem to be rare in practice.
if (.Platform$OS.type != "windows") {
library(reticulate)
# In this case, we'll use reticulate directly to construct our conda
# environment; though we'll cheat a little and use basilisk's conda
# installation, otherwise reticulate will try to install its own miniconda.
tmp2 <- file.path(getwd(), "basilisk-vignette-test2")
if (!file.exists(tmp2)) {
conda.bin <- file.path(
basilisk.utils::getCondaDir(),
basilisk.utils::getCondaBinary()
)
conda_install(tmp2,
packages=c("scipy==1.9.1"),
python_version="3.10",
channels="conda-forge",
additional_create_args="--override-channels",
additional_install_args="--override-channels",
conda=conda.bin
)
}
basiliskRun(env=tmp2, fun=function(mat) {
module <- reticulate::import("scipy.stats")
norm <- module$norm
norm$cdf(c(-1, 0, 1))
}, mat = x, testload="scipy.optimize")
}## [1] 0.1586553 0.5000000 0.8413447It is worth highlighting the fact that we were able to call basiliskRun() successfully on two different environments within the same R session.
This enables the construction of complex analysis workflows that span across R and multiple Python environments.
sessionInfo()## R Under development (unstable) (2024-10-21 r87258)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 24.04.1 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.21-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats graphics grDevices utils datasets methods base
##
## other attached packages:
## [1] basilisk_1.19.0 reticulate_1.39.0 BiocStyle_2.35.0
##
## loaded via a namespace (and not attached):
## [1] cli_3.6.3 knitr_1.48 rlang_1.1.4
## [4] xfun_0.48 png_0.1-8 jsonlite_1.8.9
## [7] dir.expiry_1.15.0 htmltools_0.5.8.1 sass_0.4.9
## [10] rmarkdown_2.28 grid_4.5.0 filelock_1.0.3
## [13] evaluate_1.0.1 jquerylib_0.1.4 fastmap_1.2.0
## [16] yaml_2.3.10 lifecycle_1.0.4 bookdown_0.41
## [19] BiocManager_1.30.25 compiler_4.5.0 Rcpp_1.0.13
## [22] lattice_0.22-6 digest_0.6.37 R6_2.5.1
## [25] parallel_4.5.0 bslib_0.8.0 Matrix_1.7-1
## [28] withr_3.0.2 tools_4.5.0 basilisk.utils_1.19.0
## [31] cachem_1.1.0